Required Items
- LabChassis rack shelf with NanoKVM Full mounting
- Sipeed NanoKVM Full
- 1 foot slim HDMI cable
- 1 foot USB-C to USB-A cable (Some mini-PCs may also be able to use a 1ft USB-C to USB-C cable)
Assembly Steps
- Connect the HDMI cable and USB-C cable to the HDMI and HID ports on the NanoKVM Full. Note: there are two USB-C ports on the same side of the KVM. Plug the USB-C cable into the port closer to the heatsink side. We recommend you use slim 1 foot HDMI and USB-C to USB-A cables to allow the cables to more easily fit inside the shelf.
- Bend the cables around the heatsink of the KVM and slide the KVM into the rack shelf cables-first. Make sure that the KVM display is facing the outside of the shelf and the heatsink facing inwards.
- Slide the KVM all the way into the shelf until the KVM fits inside the two clips of the KVM slot.
- Adjust the lengths of the USB and HDMI cables by pulling or pushing the cables further into or further out of the shelf. Connect the HDMI and USB cables to the mini-PC.
